How to Format Any Drive With the Help of Command Prompt (CMD)?

Command prompt sometimes called CMD is a very exiting feature of the windows. By the help of the command prompt you can perform all the tasks related to the computer setting and configuration. You can say it is a interface by which we can perform many tasks with a very fast speed. Sometimes, there are some features which does not perform by the help of the Graphic User Interface. In This situation you can perform tasks by the help of the Command Prompt. Here, I am giving an example of the formatting a disk drive.

Example:-

1. Go to RUN
2. Type CMD in the run text box
3. Press ENTER key
4. You will see an window like this


5. In this window you have to type a command Format D: and press ENTER key

After some time you will get a message the drive is formatted successfully.


Comments

Post a Comment

Popular posts from this blog

Straight Cable Color Codes | Networking Cable Color Codes | Network Cable Crimping Color Code | NCCC

Image
Networking cable color code is requires when we crimp the UTP (Unsheilded Twisted Pair) cable. It is most important for every network guys. Without the knowledge of this color code you can not make a cable to connect the systems each other. Whenever you are going to make a cable of the network you have to identify the devices which you are going to connect. If you have same devices like PC to PC, Switch to Switch, Hub to Hub you have to me cross cable OR if you have different devices like PC to Switch, PC to Hub, then you have to make Straight Cable. For identifying the color code follow the below Table S. No. Straight Cable Color Code Cross Cable Color Code Cable END 1 Cable END 2 Cable END 1 Cable END 2 1 Orange White Orange White Orange White Green White 2 Orange Orange Orange Green 3 Green White
Read more

How to Assign IP Address in Windows 7? | Assign IP Address in Windows 7

Image
IP Address is a unique identification of the system in the network. It is recommended to live in network. If your system does not have  IP address , you can not live in network. If two system have same  IP address , both system will be out of network. To assign  IP address  there are two methods: 1. Dynamic:  It is use for dynamically assign  IP address  into the system by the help of DHCP server or WINS server OR APIPA server. There server are used for assigning  IP address automatically. 2. Static:  In this method w e have to provide  IP address manually.  To assign  IP address   manually  follow the steps below First of all click on the  Start  and type the Network and Sharing in the Search Box  and click on the Network and Sharing Center  as shown in the following figure Network and sharing center window will open now go to the left pane of the window and click on Change adapter Settings  as shown in the following figure Now select the Local Area Connection Right
Read more

How to Open My Network Places by the Help of Command Prompt?

Image
Sometimes we not found my network places icon on the desktop and start menu. In this situation, how to open my network places? OR you want to open My Network Places by the help of the command prompt. Now, you have to remember the command to open the My Network Places. Here I am writing the command which works on all the windows operating systems. 1. Go to RUN or open RUN 2. Type the command NCPA.CPL 3. Press ENTER key Now you will get the window of the Network Connections. It contains all the network adapter connected to the system. See below figure
Read more