Straight Cable Color Codes | Networking Cable Color Codes | Network Cable Crimping Color Code | NCCC


Networking cable color code is requires when we crimp the UTP (Unsheilded Twisted Pair) cable. It is most important for every network guys. Without the knowledge of this color code you can not make a cable to connect the systems each other. Whenever you are going to make a cable of the network you have to identify the devices which you are going to connect. If you have same devices like PC to PC, Switch to Switch, Hub to Hub you have to me cross cable OR if you have different devices like PC to Switch, PC to Hub, then you have to make Straight Cable. For identifying the color code follow the below Table

S. No.
Straight Cable Color Code
Cross Cable Color Code
Cable
END 1
Cable
END 2
Cable
END 1
Cable
END 2
1
Orange White
Orange White
Orange White
Green White
2
Orange
Orange
Orange
Green
3
Green White
Green White
Green White
Orange White
4
Blue
Blue
Blue
Blue
5
Blue White
Blue White
Blue White
Blue White
6
Green
Green
Green
Orange
7
Brown White
Brown White
Brown White
Brown White
8
Brown
Brown
Brown
Brown

Comments

Post a Comment

Popular posts from this blog

How to Assign IP Address in Windows 7? | Assign IP Address in Windows 7

Image
IP Address is a unique identification of the system in the network. It is recommended to live in network. If your system does not have  IP address , you can not live in network. If two system have same  IP address , both system will be out of network. To assign  IP address  there are two methods: 1. Dynamic:  It is use for dynamically assign  IP address  into the system by the help of DHCP server or WINS server OR APIPA server. There server are used for assigning  IP address automatically. 2. Static:  In this method w e have to provide  IP address manually.  To assign  IP address   manually  follow the steps below First of all click on the  Start  and type the Network and Sharing in the Search Box  and click on the Network and Sharing Center  as shown in the following figure Network and sharing center window will open now go to the left pane of the window and click on Change adapter Settings  as shown in the following figure Now select the Local Area Connection Right
Read more

How to Open My Network Places by the Help of Command Prompt?

Image
Sometimes we not found my network places icon on the desktop and start menu. In this situation, how to open my network places? OR you want to open My Network Places by the help of the command prompt. Now, you have to remember the command to open the My Network Places. Here I am writing the command which works on all the windows operating systems. 1. Go to RUN or open RUN 2. Type the command NCPA.CPL 3. Press ENTER key Now you will get the window of the Network Connections. It contains all the network adapter connected to the system. See below figure
Read more